top of page
  • Facebook
  • Instagram
  • Youtube
  • TikTok


 Call Us: 816-327-2921 
 


Made in the USA , Because it Matters
 

One Jobsite Setup Every Crew Can Run Without You

Writer: Dean Talley
Dean Talley
3 days ago
3 min read

In a lot of roofing companies, that's how it works. The setup that keeps the yard clean and puts your name in front of the neighbors isn't written down anywhere. It's a habit your best lead picked up over a few hundred jobs, and every other crew runs its own version of it.


That holds up until you add a crew, or your lead takes a week off in April. Then the beds get crushed, the logo ends up facing the house, and the homeowner calls about a nail in the driveway. The fix is one standard every crew runs the same way, and the slow weeks before the holidays are the time to write it.


The five-step setup standard


Keep it short enough to fit on one page in the truck. Here's the version we'd start with.


  1. Walk the yard before anything comes off the roof. Find the beds, the AC unit, the windows and anything else the homeowner cares about, and clear leaves and toys out of the drop zone.

  2. Put the right size in the right place. The 16x20s go on the gables and dormers, and the 20x30s go on the long vertical drops.

  3. Hang from the top, not the ground. Smart Tarps hang straight down from the gutter line or roof edge, held by nails through the brass grommets or by spring clamps on the gutter. The grommets are every 24 inches, so nobody has to guess where the next one goes.

  4. Check it from the curb. Walk to the sidewalk and look back. The unprinted bottom section should cover the bushes and hardscape, and your logo and QR code should face the street where a neighbor can read them.

  5. Break it down the same way every time. Clean the tarps, fold each one into its carry bag and load them on the truck, so the next crew finds a full set. When the mud needs it, they can be pressure-washed at up to 200 psi.


Put a clock on it


A standard nobody checks turns back into a habit. Give each step a target and watch it on a few jobs.


For the hang itself, you already have a benchmark: one person can hang the front of a single-story ranch in about seven minutes. If a crew is taking a lot longer, watch them do it once. Usually the walk-through got skipped, or the wrong size went up on the wrong wall and had to come back down.


The curb check takes less than a minute, and it's the step crews skip first. It's also the step that decides whether the neighbor across the street sees your name or a plain sheet of tarp.


Teach it before spring


Write the five steps on one page and put a copy in every truck. Then run each crew lead through it on a job or two before the schedule fills back up. When you hire in the spring, the new guy learns the same setup on his first day, and the yard looks the same no matter which crew shows up.


That's what the neighbors notice. Three jobs on three streets, the same clean lawn and the same name on the grass, and they start to think of you as the company that does it right.


Every crew needs its own full set to run the standard. The Smart Start Bundle outfits one full jobsite: two 16x20s and two 20x30s, each with your logo and QR lead capture, plus a carry bag for every tarp. Send your logo and you get four design mock-ups within 3 to 5 days, and nothing prints until you approve one.


See what's in the Smart Start Bundle, or call 816-327-2921 and we'll help you count how many sets your crews need and get your artwork started.



And if you want to see the software side of Smart Tarp, take a look at SmartOS.

 
 
 

Comments


bottom of page